Belt Conveyors

801 Roller

  • Beds:
    • Box channel 12-gauge galvanized x 6” deep with 1” flange.
    • Beds are bolted together using 11/16” hex tube and 7/16” spanner rod.
    • All beds have bolted guardrail tube crossmembers and return rollers.
    • A standard bed is 6 ½” wider than the belt.
    • Allow 2 inches per side for hardware bolted to the frame.
  • Carrier Rollers:
    • Rollers are 1.9” diameter x 16-gauge steel with ball bearings and 7/16” hex axles.
    • Axles are spring loaded for easy assembly or removal.
    • The top of roller is located 1/8” above the top of conveyor bed.
    • Carrier rollers are available on 3”, 6”, 9” or 12” Centers.
  • Drive Pulleys:
    • Standard Drive pulleys come in 6”, 9” or 12” diameter crowned and lagged.
    • Drive pulley shafts come in 1 3/16” diameter, 1 7/16” diameter or 1 15/16” diameter.
  • End Pulleys and Take-up Pulleys:
    • 4” diameter crowned with 1 3/16: dia. shaft.
    • Internal mounted bearings are standard.
  • Drive Snubber Roller:
    • Rollers are 2 ½” diameter 11-gauge steel with ball bearings, 11/16” hex tube spanner and 7/16” diameter shaft.
  • Belt return Idler Rollers:
    • Rollers are 1.9” diameter x 16-gauge steel with ball bearings and 7/16” hex axles.
    • Axles are spring loaded for easy assembly or removal.
  • Belt Speed:
    • 60 Feet Per Minute (FPM) is the most common.
    • Other speeds and variable speeds are available as options.
"A" Bed Width "B" Belt Width "C" Roller Width
18 1/2" 12 9 1/4"
24 1/2" 18 15 1/4"
30 1/2" 24 21 1/4"
36 1/2" 30 27 1/4"
42 1/2" 36 33 1/4"
48 1/2" 42 39 1/4"